You will need a glass jar, glow sticks (I picked some up from the dollar store), rubber gloves to protect your hands, scissors, I recommend protective eyewear, and a piece of tulle (optional).
If you are using the tulle, cut a piece slightly larger than the jar, and place inside.
Now, put on those rubber gloves. Crack the glow stick to active the glow material. Insert the end of the glow stick into the jar and cut the tip. It’s important to do this step with the glow stick in the jar as to avoid splashing, remember that you are working with chemicals. There is also a glass vile inside the plastic tube, and that glass breaks when you crack the stick. So best to keep all the tiny glass bits contained within your jar!
Next, stir and shake the cut glow stick around inside your jar. You will need some patience for this part, as it doesn’t just flow out easily. In some instances, the glow material may get clogged due to a large piece of glass that didn’t break. I disposed of these sticks and used a new one, for safety reasons.
Once you have the desired amount of glow material in your jar, replace the lid and shake it up. I used about 3 bracelet size sticks per jar.
Now turn off the lights and watch them glow! Here is the first jar.
Credits : The Gold Jellybean